IMPORTANT:
About NuTone Model Numbers

Some NuTone model numbers have an alpha suffix.

Example: 41000-L.

It is important to refer to the exact model number with the alpha suffix when selecting parts, requesting service or speaking to a technical support representative regarding your NuTone product.

Start by locating your product type:

Range Hood

Standard Under Cabinet Allure Under Cabinet Island Downdraft

Ventilation Fan

Standard Bath Fan Designer Style Bath Fan QuietTest

Attic & Whole House Ventilation Fan

Powered Attic Ventilators (PAVs) Utility Ventilators

Central Vacuum System

Power Head Power Unit

Heater

Bulb Heater ValueTest Heater

Standard Under Cabinet

Label Placement

The model label is located either on the right or left side wall of the range hood canopy.

View a Sample

Allure Under Cabinet

Label Placement

Remove range hood filters by pulling down on the filter tabs. Theseries number is located either on the back wall of the range hood housing or on the Teflon air pan. (Example... WS1, WS2 or WS3)

View a Sample

Island Downdraft

Label Placement

The model label is located on the front of unit beneath the cook top.
Cabinet drawers or shelving may need to be removed to access label.

View a Sample

Standard Bath Fan

Label Placement

Remove the grille by pulling down 2 inches. Reach behind the grille and squeeze the mounting springs to remove the grille. The model label is located in the corner closest to the outlet. Some fans may have the model stamped into the motor plate instead of a printed sticker label.

View a Sample

Whole House Ventilator

Label Placement

The data label is located on top corner of the unit housing.

View a Sample

QuietTest

Label Placement

Remove the grille by pulling down 2 inches. Reach between the grille and ceiling and squeeze the mounting springs together. Pull springs out of slots in mounting plate. The model label is located on the power unit mounting plate.

View a Sample

Powered Attic Ventilators (PAVs)

Label Placement

The model label is located on the cover of the wiring box which is visible from the attic.

View a Sample

Utility Ventilators

Label Placement

Removed the grille by a central knob or two screws. The model may be ceiling or wall mounted. The label is located on the inside perimeter of housing opposite wiring panel.

View a Sample

Central Vacuum - Power Head

Label Placement

The model number is located on the bottom of the power head.

View a Sample

Central Vacuum - Power Units

Label Placement

The model number is located on the side of the power unit.

View a Sample

Bulb Heater

Label Placement

Remove the bulb(s) from the unit. Remove the springs from the hooks inside the rough-in box. The model number is located on the inside end of the rough-in box.

View a Sample

ValueTest Heater

Label Placement

Release the locking tabs on the lens. Remove the lens. Remove the reflector mounting screw. Remove the reflector and grille. The model number is located on the inside edge of the housing.

View a Sample